Product Description

Water permeable adhesive stone
Operating process
First, the ratio
A: B = 1:1
Colored stones: Adhesive = 40:1
Second, the process
The first step: the selection of adhesive stone
1, polished through the screening of various colors of washed stone particle size 3-5 mm best
2, the color should try to avoid the choice of gray, white and other light colors
The second step: the grassroots requirements
1. The strength of the cement should be good, the surface should be flat, and there should be no sand, dust, oil stains and other impurities.
2, the cement floor must be dry, there can be no moisture and moisture
The third step: before washing the stone with the glue
1, the washed stone must be dried, not wet
2, such as bagged stones need to mix the stones in a batch to avoid color difference.
3, according to the ratio of stone and adhesive mixing 40:1, mix the material evenly
Third, matters needing attention
It is necessary to spread the mixed materials within 1.30 minutes, and so on.
2. Do not let people walk on the surface within three hours.
3. Avoid going to work when the weather is bad.
4. Fast-resisting surface mask acrylic varnish finish can effectively improve its yellowing resistance
5. Construction temperature, the substrate temperature of 10~35 °C is at least 3 °C higher than the air dew point temperature;

6. After mixing the two components, it is not easy to place for a long time. When constructing, it is necessary to adhere to the principle of “specialized ingredients, multiple times, and continuous supply”.